Skip to content
REFERENCE / ZLIB × LEAN

inflateReset2

Reset and select a new wrapper and maximum window size.

Full chapter and shared rules ↗
int ZEXPORT inflateReset2(z_streamp strm, int windowBits);

Reset and select a new wrapper and maximum window size.

Return values and next calls

Return type. int — zlib status code

The result says whether a new wrapper and window configuration took effect for a fresh decode.

inflateReset2()
Returned value Meaning and conditions Caller’s next step
Z_OK
New configuration applied
The stream check passed and windowBits was accepted; decoding resets, history and header registration are discarded, and validation is enabled for the new wrapper. Provide input and output ranges for the new format, then call inflate.
Z_STREAM_ERROR
Configuration or stream refused
windowBits is invalid or the stream check failed; nothing changes. If the original stream is valid, choose an accepted configuration; resolve invalid stream use before proceeding.

Reading the result.

  • Accepted values are -15..-8, 0, 8..15, 16, 24..31, 32 and 40..47; the full contract gives their wrapper meanings.

Calling conditions and effects

Domain Restricted domain: live streams and every signed windowBits value.

Effects Mutates state and may free the window, never allocates.

Pre The common live-stream conditions hold. Old decoding is being abandoned.

Proof goals.

  • Goal. Goal.inflateReset2_safety (Safety/Streams.lean); required. Theorem: ZlibF.Spec.Public.StreamCallSafetyProof.inflateReset2_safety (public-stream-call-safety.lean). The goal has two clauses: the refusal of a refused stream, and one call on a reachable stream. Goal.inflate_refusal (Safety/Refusals.lean), also required, states the same refusal.
  • Applies when. The refusal asks that strm is a refused stream (RefusedInflate). The call on a reachable stream asks (StreamCallDomain; this call has no argument condition):
    1. strm is a reachable stream (StreamReachable);
    2. the platform size bound holds (ByteObjectsFit).
  • Covered without condition. Every windowBits, accepted or not. Every reachable stream, in every mode: before decoding, mid-block, at stream end, and after a data or memory error. In the refusal: every refused stream and every value of the other arguments.
  • Guarantees (StreamCallSafe for the call on a reachable stream).
    • Returns. On a refused stream the call returns Z_STREAM_ERROR. On a reachable stream the call returns.
    • State. On a reachable stream, the stream keeps its invariant (StreamInvariant).
    • Writes. On a refused stream, nothing: the heap is unchanged. On a reachable stream, only the stream record and the stream's own blocks.
    • Allocations. On a reachable stream, the exact allocation account (LiveChange).
  • Not in this goal. A stream record with zalloc and zfree set whose state is a garbage pointer, points to a freed state, or points to a deflate state: no goal covers this call on such a record (deviations). Which windowBits are accepted, and the field values after the call: functional goal Goal.inflateReset2 (not planned; a theorem proves it).
Complete return conditions and boundaries

Post For an accepted value, returns Z_OK and has the effect of inflateReset with the new request. Accepted values and meanings are listed under inflateInit2_. Validation is enabled for the new wrapper request.

Edges Invalid values return Z_STREAM_ERROR before changing anything. Changing the requested size frees an incompatible window. Pending header registration and history are discarded, even if the size stays the same.

Shared conditions and scope

Use an inflate stream to decode input in pieces while controlling output space. Select zlib, gzip or raw DEFLATE at initialization, then continue with more input or room until completion, a dictionary request or an error. inflateEnd releases the decoder after any of those outcomes. For whole-buffer zlib decoding, see uncompress.

Task Entries
Start or reuse Init, configured init, reset, new configuration, keep history
Decode or provide metadata Inflate, set dictionary, read history, gzip header
Recover or inspect Sync search, sync point, mark, table use
Adjust or branch Prime bits, validation, distance option, copy
Release storage End

The contracts follow the pinned inflate.c with patch 0001 applied and zlib.h, in the default LP64 Linux build, with gzip enabled and without the optional invalid-distance or strict-distance modes. Patch 0001 changes inflateCopy only (patches). These are focused contracts: Pre describes ordinary correct use and is deliberately narrower than what the function accepts. Cases outside Pre that the C still handles appear under Errors or Edges. A call outside Pre is not thereby undefined, and it need not return an error code. See how to read a contract for the labels.

What is proved. Safety only: each call returns without undefined behaviour or a memory error, writes only what its goal names, and leaks nothing (safety). Each entry gives its goal under Proof goals, in the five items and with the fixed phrases that Reading a Proof goals paragraph defines: the goal and its theorem; the conditions under which it applies, in the order of the Lean statement; what it covers for every value; what it guarantees (returns, state, writes, allocations); and what it leaves to another goal. The proof assumes the conditions listed there, not the documentary Pre. Post, the return tables and the notes describe functional behaviour. They are read from the C, are to confirm where no theorem states them, and are not required for the safety results. Progress says which goals are done.

Common conditions

The caller and the decoder keep different things. The caller supplies the input and output buffers of each call. The decoder keeps the current parsing stage, the bits not yet used, and the history that later copies may need. Giving it a different output array does not start a new decoding task.

next_in is the start of the unread input and avail_in the number of readable bytes. next_out is the next output position and avail_out the number of writable bytes that remain from there. For example, a 5-byte output array that returns with 2 bytes of room has received 3 bytes. Take those bytes first, then set the pointer and the count to the next writable region.

All contracts below have a Restricted domain. A C pointer type alone does not supply the storage, lifetime or call history required here.

  • A live stream was successfully initialised or copied, has not been ended, retains its library-owned state, and is used without concurrent calls. Use the default allocator and free function. Init takes a writable, non-live stream with allocator fields set to NULL or the default functions.
  • A readable or writable range has the stated capacity for the whole call. Caller ranges are separate from the stream and its owned storage. Input and output ranges do not overlap. Dictionary destinations, the registered header record and its destination buffers are separate from each other and from the stream. Registered header storage is also separate from input/output ranges on calls using it. These restrictions are part of Pre; each entry's Proof goals says which of them its goal assumes.
  • The caller owns its stream object and buffers. The library owns the state and optional window. A call changes only its stream, owned storage, stated output ranges and any registered header destination. It never frees caller buffers.
  • A rejected stream check returns Z_STREAM_ERROR without changes, unless a query or copy contract says otherwise. This covers NULL and safely readable records rejected by the check; it does not cover dangling or arbitrary pointers. The check requires allocators, state, the state's back-pointer and a valid mode.
  • Counters use the C unsigned widths and wrap. No contract assumes allocation succeeds. End remains available after decoding, dictionary or allocation errors.
  • The proof goals speak of a reachable stream where the contracts say live stream (how to read a contract). A call that a goal covers extends the stream's history: when it returns, with any code, the stream is reachable again and the goal of the next call applies. inflateEnd ends the history.
  • Result cells as values. inflateGetDictionary reports a length through uInt *dictLength. The translation does not model that cell as memory: the function takes the cell's old value, or the fact that the pointer is NULL, and returns the new value. So the goal says nothing about the address of the cell, and a cell that overlaps another object cannot be expressed.
flowchart LR
    I["Init"] --> F["inflate"]
    F -->|"Z_NEED_DICT"| D["SetDictionary"] --> F
    F -->|"more room or input"| F
    F -->|"end or abandon"| E["End"]
    F -->|"data error"| R["Reset or Sync"] --> F

Safety goal

ZlibF.Spec.Public.Goal.inflateReset2_safety

State: done · Status of the results

/-- `int inflateReset2(z_streamp strm, int windowBits)`.
**Safety of `inflateReset2`**: a `NULL` or inconsistent stream (`RefusedInflate`) is refused with
`Z_STREAM_ERROR` and nothing changed; and on every reachable inflate stream, with the caller's
arguments as `zlib.h` asks, the call is safe (`StreamCallSafe`). -/
def Goal.inflateReset2_safety : Prop :=
  (∀ h p windowBits, RefusedInflate h p →
    C.run (Zlib.Inflate.inflateReset2 p windowBits) h = .ok (Z_STREAM_ERROR, h)) ∧
  (∀ h r windowBits,
     StreamCallDomain .inflate h r (.inflateReset2 (some r) windowBits) →
     StreamCallSafe .inflate h r (.inflateReset2 (some r) windowBits))
Related definitions and source ↗

Functional contract (beyond safety)

ZlibF.Spec.Public.Goal.inflateReset2

State: done · Status of the results

/-- `int inflateReset2(z_streamp strm, int windowBits)`.
Invalid parameters leave the heap unchanged. A changed window size releases the old window.
The new request restores validation even if `inflateValidate` previously disabled it. -/
def Goal.inflateReset2 : Prop :=
  ∀ h r i z s wb, InflateView h r i z s → z.zfree = .fn "zcfree" →
    WindowAllocation h s.window →
    C.run (Zlib.Inflate.inflateReset2 (some r) wb) h =
      match Api.inflWbits wb.toInt with
      | none => .ok (Z_STREAM_ERROR, h)
      | some (wrap, bits) =>
        let w : Int32 := match wrap with | .raw => 0 | .zlib => 5 | .gzip => 6 | .auto => 7
        let base := if s.wbits.toNat = bits then h else dropWindow h s.window
        let reset := { s with
          window := if s.wbits.toNat = bits then s.window else .null
          reqbits := UInt32.ofNat bits, wbits := UInt32.ofNat bits
          wrap := w, reqwrap := w, wsize := 0, whave := 0, wnext := 0 }
        .ok (Z_OK, putInflate (r.put base (inflateResetStream z reset)) i (inflateResetState i reset))
Related definitions and source ↗
ZLIB × LEAN

Contents

READING NOWinflateReset2