Skip to content
REFERENCE / ZLIB × LEAN

deflateInit_

Start a compressor with the default zlib wrapper and compression settings.

Full chapter and shared rules ↗
int ZEXPORT deflateInit_(z_streamp strm, int level, const char *version, int stream_size);

Start a compressor with the default zlib wrapper and compression settings.

Return values and next calls

Return type. int — zlib status code

The result separates an established compressor from compatibility, argument and allocation failures. Only Z_OK establishes a live stream that needs ending.

deflateInit_()
Returned value Meaning and conditions Caller’s next step
Z_OK
Compressor established
Compatibility and parameters are valid, and all five allocations succeed; zlib wrapping, window 15, memory level 8 and the default strategy are installed. Supply buffers and begin compression; eventually call deflateEnd, even if abandoning the task.
Z_VERSION_ERROR
Compatibility refused
version is NULL, its first byte does not match, or stream_size differs from sizeof(z_stream). This check precedes the strm check and changes no stream fields. Correct the version and structure size before initialization; this result creates no new state to release.
Z_STREAM_ERROR
Null stream
Compatibility passes, but strm is NULL. Provide a writable stream record satisfying initialization preconditions.
Z_STREAM_ERROR
Parameters refused
level is neither -1 nor 0..9. Refusal precedes allocation, but msg has been cleared and default allocator installation may have cleared opaque. Correct the parameters and reinitialize under the init preconditions; there are no new allocations to end.
Z_MEM_ERROR
State allocation failed
The initial state allocation fails; state retains its entry value and no newly allocated block remains live. After addressing memory pressure, retry under the init preconditions; this failure needs no deflateEnd.
Z_MEM_ERROR
Buffer allocation failed and cleaned up
After state allocation succeeds, all four buffer allocations are attempted. Any failure releases every new block, sets state to NULL and reports insufficient memory in msg. Cleanup is complete for this call; address memory pressure before initializing again.

Calling conditions and effects

Domain Restricted domain. Effect: allocate and initialise.

Pre strm is writable and owns no live compressor state. Its allocator fields are initialised as above. level is -1 or 0..9. version has a readable first byte matching ZLIB_VERSION, and stream_size == sizeof(z_stream).

Proof goals.

  • Goal. Goal.deflateInit__safety (Safety/Initialisation.lean); required. Theorem: ZlibF.Spec.Public.InitSafetyProof.deflateInit__safety (public-init-safety.lean).
  • Applies when (InitArguments):
    1. the heap is a library heap (Fresh, Uniq, LibraryGlobals);
    2. version is NULL or its first byte is readable (VersionValue);
    3. strm is NULL, or points to a readable stream record whose zalloc and zfree are each NULL or the default function (DefaultOrNull).
  • Covered without condition. Every level, valid or not; every stream_size; every value of the first byte of version; every value of the other fields of the record, state included; every allocation outcome. If the record was a live stream, the call still returns, but the old state stays allocated and the record no longer points to it: the account records that leak, it does not exclude it.
  • Guarantees (InitResultSafe).
    • Returns. The call returns. With a NULL strm the code is Z_VERSION_ERROR or Z_STREAM_ERROR.
    • State. With Z_OK, strm is a reachable stream.
    • Writes. With a NULL strm, nothing: the heap is unchanged. Otherwise only the stream record and blocks the call itself allocates.
    • Allocations. With Z_OK, every block the call allocated is one of the stream's own blocks, and nothing is freed (LiveChange). With any other code the allocated blocks are the same as before the call.
  • Not in this goal. A stream whose zalloc or zfree is a custom function: outside every goal (deviations). Which code each refusal and each allocation failure returns, and the field values after the call: functional goal Goal.deflateInit_ (not planned; a theorem proves it). That some call does return Z_OK: Goal.deflate_initialisation_domain (Safety/Domains.lean), required.
Complete return conditions and boundaries

Post the deflateInit2_ contract holds with method Z_DEFLATED, window 15, memLevel 8 and Z_DEFAULT_STRATEGY. Level -1 selects 6. No input is consumed and no output is written. Return Z_OK on success or Z_MEM_ERROR with complete cleanup.

Outside focused scope: the same version and argument refusals as deflateInit2_ apply. The deflateInit macro supplies version and structure size.

Shared conditions and scope

Use a z_stream compressor when input arrives in pieces, output space is limited, or you need a chosen wrapper, dictionary or flush boundary. A wrapper is the header, trailer and integrity information added around the DEFLATE data; raw DEFLATE has none. Initialize once, call deflate with successive buffers, and end the stream even if compression is abandoned. For a single buffer, see compress and compress2.

Task Entries
Start or reuse Init, configured init, reset, reset retaining history
Supply metadata or history Dictionary, read history, gzip header
Compress and size output Deflate, bound, pending output, last flush bits
Adjust or branch Parameters, tuning, priming, copy
Release storage End

The contracts follow zlib.h and deflate.c of the pinned zlib with the patches applied, in the default LP64 Linux build. Of the seven patches only patches 0006 and 0007 touch deflate.c. Both change deflateBound_z, and with it the result of deflateBound, which calls deflateBound_z: 0006 one condition, 0007 the length of the gzip extra field in the wrapper size. The entry deflateBound_z states both changes. The patches change no other function. These are focused contracts: Pre describes ordinary correct use and is deliberately narrower than what the function accepts. Cases outside Pre that the C still handles appear under Errors or Outside focused scope. A call outside Pre is not thereby undefined, and it need not return an error code. See how to read a contract for the domain and effect labels.

What is proved. Safety only: each call returns without undefined behaviour or a memory error, writes only what its goal names, and leaks nothing (safety). Each entry gives its goal under Proof goals, in the five items and with the fixed phrases that Reading a Proof goals paragraph defines: the goal and its theorem; the conditions under which it applies, in the order of the Lean statement; what it covers for every value; what it guarantees (returns, state, writes, allocations); and what it leaves to another goal. The proof assumes the conditions listed there, not the documentary Pre. Post, the return tables and the notes describe functional behaviour. They are read from the C, are to confirm where no theorem states them, and are not required for the safety results. Progress says which goals are done.

Shared conventions

Under each stated Pre, the documented behaviour is that the call terminates without a runtime fault and that Post holds. A call that leaves the stream live preserves its representation invariant. The part of this that is proved is the safety goal of the entry.

First, how data changes hands in one call. next_in points to the start of the input not yet read, and avail_in is the number of bytes readable from there. next_out points to the next writable position, and avail_out is the output room that remains, also in bytes. One call may consume only part of the input and deliver only part of the output. Read the updated pointers and counts, take the bytes delivered, then give the same stream more input or more output room.

  • Live stream: a writable z_stream with a compressor state established by successful init or copy, preserved by legal calls, and not ended. The caller does not alter its internal state or allocator fields. Calls on one stream are sequential.
  • Buffers: input covers avail_in readable bytes; output covers avail_out writable bytes. They do not overlap each other, the stream or its owned state. A non-NULL scalar result points to a writable cell separate from other results and stream memory. These separation conditions are assumptions of the contracts. Where a safety goal assumes one too, its Proof goals says so and deviations has a row.
  • Allocator: the default allocator/free pair is used, or both fields are NULL before init. Allocation may fail on any attempt. Custom allocator callbacks are outside this page's scope.
  • Frame and ownership: calls change only their stream, its owned state and stated output regions. Caller input is read-only. Caller buffers and header records remain caller-owned. Only init and copy allocate; only their failure cleanup and deflateEnd free memory. Other calls preserve the stream's allocation set.
  • Header lifetime: a retained gzip header and its optional fields remain readable and unchanged while used. Non-NULL name and comment have a terminating zero; extra covers its stated length. The contracts on this page take extra_len <= 65535.
  • Checked refusals: except for init and bounds, a failed stream check returns Z_STREAM_ERROR before normal operation, without writes. deflateCopy additionally clears a non-NULL destination state. Query output cells are untouched on this refusal.
  • Restricted domain means these explicit memory, lifetime and call-order conditions, plus the entry's Pre. It does not mean every representable pointer or integer is accepted. Error summaries cover stream records and states that the checks can read, not arbitrary invalid addresses.
  • Reachable stream: the proof goals speak of a reachable stream where the contracts say live stream (how to read a contract). A call that a goal covers extends the stream's history: when it returns, with any code, the stream is reachable again and the goal of the next call applies. deflateEnd ends the history.
  • Result cells as values: deflateGetDictionary, deflatePending and deflateUsed report results through pointers (uInt *dictLength, unsigned *pending, int *bits). The translation does not model these cells as memory: each function takes only the fact that a pointer is NULL or not, and returns the values. So the goals say nothing about the address of a result cell, and a cell that overlaps another object cannot be expressed.

Safety goal

ZlibF.Spec.Public.Goal.deflateInit__safety

State: done · Status of the results

/-- `int deflateInit_(z_streamp strm, int level, const char *version, int stream_size)`.
**Safety of `deflateInit_`** (macro `deflateInit`): as `Goal.deflateInit2__safety` with the
default method, window, memory level and strategy, for every level. -/
def Goal.deflateInit__safety : Prop :=
  ∀ h strm version size level, InitArguments h strm version →
    ∃ rc after, C.run (Zlib.Deflate.deflateInit_ strm level version size) h = .ok (rc, after) ∧
      InitResultSafe .deflate h after strm rc
Related definitions and source ↗

Functional contract (beyond safety)

ZlibF.Spec.Public.Goal.deflateInit_

State: done · Status of the results

/-- `int deflateInit_(z_streamp strm, int level, const char *version, int stream_size)`.
The default method, window, memory level and strategy; the level remains arbitrary. -/
def Goal.deflateInit_ : Prop :=
  ∀ level, DeflateInitContract (fun p v size => Zlib.Deflate.deflateInit_ p level v size)
    level 8 15 8 0
Related definitions and source ↗
ZLIB × LEAN

Contents

READING NOWdeflateInit_